FuelTech builds standalone engine management for everything from single-cylinder mini bikes to 12-cylinder drag cars and turbo jet skis. ASE stocks the FuelTech line next to its own JZ, K-series and ZF 8HP swap hardware, so the ECU, harness, sensors and ignition for a swap can come from the same place as the adapter plates.
Water Sports — PWC harnesses and hardware for Yamaha, Sea-Doo and Kawasaki
How the system fits together
Start with the ECU. Every harness, connector kit and adapter harness is built for a specific ECU family, so pick the controller first.
Add a harness. Complete harnesses come pre-terminated for an engine family (LS, V8, universal 4- and 6-cylinder); unterminated harnesses are for custom builds.
Fuel and spark. High impedance FT Injectors run straight off the ECU; low impedance injectors need a peak & hold driver. Ignition modules (SparkPRO inductive or FTSPARK CDI) drive the coils.
Sensors and CAN accessories. Wideband controllers, EGT-4 modules, switch panels and the input expander talk to the ECU over CAN, which keeps analog inputs free for other sensors.
This complete harness takes a Ford Godzilla engine swap standalone on a FuelTech FT550 or FT550LITE. It comes pre-terminated for the Godzilla with every...
The FuelTech SparkPRO-8 is a high-energy inductive ignition module for coils that do not have a built-in igniter. It provides 8 ignition outputs, pushes...
The FuelTech SparkPRO-6 is a high-energy inductive ignition module for coils that do not have a built-in igniter. It provides 6 ignition outputs, pushes...
The FuelTech SparkPRO-5 is a high-energy inductive ignition module for coils that do not have a built-in igniter. It provides 5 ignition outputs, pushes...
The FuelTech SparkPRO-4 is a high-energy inductive ignition module for coils that do not have a built-in igniter. It provides 4 ignition outputs, pushes...
The unterminated harness for the FuelTech WB-O2 Datalogger. It carries the unit's power feed, its analog channel inputs and its analog output. For the...
The unterminated wiring harness for the FuelTech SparkPRO-8 ignition module. The module connector is installed and the leads are left open to wire to...
The Smart Ignition Coil Plug Kit provides the connectors for wiring smart ignition coils to your FuelTech ECU or other engine management system, whether...
The unterminated wiring harness for the FuelTech SparkPRO-6 ignition module. The module connector is installed and the leads are left open to wire to...
The unterminated wiring harness for the FuelTech SparkPRO-5 ignition module. The module connector is installed and the leads are left open to wire to...
The unterminated wiring harness for the FuelTech SparkPRO-4 ignition module. The module connector is installed and the leads are left open to wire to...
The unterminated wiring harness for the FuelTech SparkPRO-3 ignition module. The module connector is installed and the leads are left open to wire to...
The FT450/550 4 Cylinder Universal A Harness gives a four-cylinder build a complete plug-and-play loom for an FT450 or FT550. It runs four injectors...
A connector kit for injectors that use the Nippon Denso style plug, for building or repairing a custom injector harness. Nippon Denso injector connector...
A connector kit for terminating injectors with EV6/EV14 connectors on a custom harness. It is specified for use with Injector Dynamics injectors. EV6/EV14 injector...
Everything needed to terminate one EV1-style injector on a custom harness: the connector, two terminals and a 90-degree boot to protect the wiring. EV1...
A short fuel injector connector adapter for going between EV6 and EV1 connector styles. EV6 to EV1 fuel injector connector adapter Converts between EV6...
A short fuel injector connector adapter for going between EV1 and EV6 connector styles. EV1 to EV6 fuel injector connector adapter Converts between EV1...
The SparkPRO-3 Nautical / Off-Road is FuelTech's 3-output high-energy inductive ignition module in a redesigned sealed case and connector that keep out water and...
The FuelTech SparkPRO-3 is a high-energy inductive ignition module for coils that do not have a built-in igniter. It provides 3 ignition outputs, pushes...
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies.
privacy policy