Sensors, relays and valves for a FuelTech installation: pressure, temperature, speed and chassis sensors, boost control solenoids, solid state relays, crank trigger wheels and the plug kits to wire them.
Pressure — the Pressure Sensor PRO comes in 0–150, 0–300 and 0–500 psi with a 0.5–4.5 V output and 1/8" NPT thread. PowerFT ECUs include a 7 bar internal MAP; the external 10 bar MAP covers up to 135.3 psi.
Temperature — GM-style air and water sensors (3/8" NPT), a 0–300°F stainless sensor, and Type K thermocouples for EGT and CHT.
Boost control — the 3-way valve works with the integrated boost controller but not with CO2; FuelTech points drag racers to the dual valve kit. Both need a PS-150 wastegate pressure sensor.
Relays — sealed 40 A relays for harness builds, a solid state relay per nitrous stage, and the FT Dual Power Driver for loads up to 25 A such as electronic wastegates.
Plug kits — most sensors are offered with or without a mating plug kit.
Order the mating plug. If you are building your own harness, choose the "w/ mating plug kit" option so the connector arrives with the sensor.
A Type K thermocouple for measuring air or liquid temperature in engines and cooling systems, from intake and intercooler air to coolant and exhaust...
This lightweight billet block mounts up to four pressure sensors in one place, away from high-vibration areas. Each sensor has its own top-to-bottom port,...
FuelTechFuelTech Other SensorsFuelTech Sensors & Valves
This throttle position sensor fits most aftermarket throttle bodies that take a Ford-style TPS. It comes fitted with a 3-way GM Metri-Pack style connector....
This holder makes the FuelTech Sealed Relay easier to mount and wire when building a harness. Designed for the FuelTech Sealed Relay Simplifies relay...
Boost ControlFuelTechFuelTech Boost Control ValvesFuelTech Sensors & Valves
FuelTech's Boost Controller Dual Valve Kit pairs two solenoid valves on a common block for the integrated boost control in PowerFT ECUs. FuelTech points...
Boost ControlFuelTechFuelTech Boost Control ValvesFuelTech Sensors & Valves
The Boost Controller Dual Injector Block is a boost control actuator for the integrated boost controller in FuelTech's PowerFT ECUs. It feeds the wastegate...
Boost ControlFuelTechFuelTech Boost Control ValvesFuelTech Sensors & Valves
This 3-way solenoid valve works with the integrated boost controller in FuelTech's PowerFT ECUs. It sits between the pressure source and the wastegate, letting...
The FuelTech Hall Effect RPM / Speed Sensor reads rotating parts such as crankshafts, camshafts, driveshafts and wheels, giving the ECU accurate engine speed...
The FuelTech Driveshaft Sensor with bracket reads driveshaft speed for traction control, driveshaft-based timing and data logging on FuelTech ECUs. It triggers off magnets...
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies.
privacy policy