Harnesses connect a FuelTech ECU to the engine, sensors and accessories. The range runs from pre-terminated engine harnesses to bare unterminated looms, plus adapter harnesses, plug-and-play vehicle harnesses and the connectors to build your own.
Complete harness — pre-terminated for an engine family, with relays and fuses built in. The FT550 LS GEN IV harness, for example, supports 58x and 24x triggers and LS3-style coils.
Unterminated harness — ECU connector on one end, loose wires on the other, for custom installs. The FT550 needs both A and B harnesses; the B harness alone is for FT450 upgrades.
Adapter harness — moves an existing installation to a newer ECU, or links accessories such as peak & hold drivers and wideband controllers.
Plug-and-play vehicle harness — plugs into the OEM harness on supported PWCs, UTVs and motorcycles.
Connector and plug kits — for repairing a harness or building one from scratch.
Match the ECU model. Harnesses and connector kits are ECU-specific. Check that the listing names your ECU (FT450, FT550, FT600 or FT700) before ordering.
A replacement female connector kit for Bosch LSU 4.2 wideband oxygen sensors. It gives a weather-resistant connection for custom wiring, repairs or new sensor...
The mating 7-pin connector for the FuelTech SparkPRO-3 Nautica/off-road igniter and the Hitachi OEM 3-channel ignition module. 7-pin mating connector Fits SparkPRO-3 Nautica/off-road Fits...
The mating 24-way main connector used across several FuelTech ECUs and modules, for building or repairing a harness. 24-way main connector Fits FT500LITE/FT500 main,...
A 24-way CPC circular connector kit for running a harness through the firewall, for new builds or modifications. Each gold-plated terminal is rated for...
A 16-way CPC circular connector kit for passing wiring through the firewall cleanly, whether you are building a harness or modifying one. The terminals...
The mating 16-way auxiliary connector for FuelTech FT500, FT500LITE and FT400 ECUs, for building a harness from scratch or repairing one. 16-way auxiliary connector...
Everything needed to build your own harness for the FuelTech FT Input Expander: the 34-pin automotive connector, terminals and a CAN 2.0B connector for...
The male connector and terminals for wiring a FuelTech EGT-4 exhaust gas temperature controller into your own harness, giving a secure connection to the...
FuelTechFuelTech Sea-Doo PWCFuelTech Water SportsFuelTech Water Sports HarnessesFuelTech Wiring Harnesses
This adapter harness installs a FuelTech FT550 ECU on Sea-Doo watercraft with the Rotax 300 engine, 2010–2023, using the factory wiring. It plugs directly...
FuelTechFuelTech Water SportsFuelTech Water Sports HarnessesFuelTech Wiring HarnessesFuelTech Yamaha PWCYamaha
A 2-plug adapter harness for installing a FuelTech FT550 ECU on 2018–2025 Yamaha 1800/1900 WaveRunners. It connects the ECU to the watercraft with minimal...
This complete harness takes a Ford Godzilla engine swap standalone on a FuelTech FT550 or FT550LITE. It comes pre-terminated for the Godzilla with every...
The unterminated harness for the FuelTech WB-O2 Datalogger. It carries the unit's power feed, its analog channel inputs and its analog output. For the...
The unterminated wiring harness for the FuelTech SparkPRO-8 ignition module. The module connector is installed and the leads are left open to wire to...
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies.
privacy policy