Injector Dynamics ID2600-XDS Injectors - 2JZ-GTE Supra 60mm, 14mm Purple Top (Set of 6)

Injector Dynamics ID2600-XDS Injectors - 2JZ-GTE Supra 60mm, 14mm Purple Top (Set of 6)

$2,390.85
Skip to product information
Injector Dynamics ID2600-XDS Injectors - 2JZ-GTE Supra 60mm, 14mm Purple Top (Set of 6)

Injector Dynamics ID2600-XDS Injectors - 2JZ-GTE Supra 60mm, 14mm Purple Top (Set of 6)

$2,390.85

View store information

Injector Dynamics ID2600-XDS Injectors - 2JZ-GTE Supra 60mm, 14mm Purple Top (Set of 6)

Injector Dynamics ID2600-XDS, 60mm length, 14mm (purple) adaptor top, 14mm lower O-ring. Set of six.

One of the highest-flow injectors Injector Dynamics makes, sized for big single-turbo 2JZ builds on E85 or methanol where an ID1700 runs out of duty cycle. This configuration is for 1993-1998 Supra Turbo (2JZ-GTE) engines already running a top-feed fuel rail with 14mm injector bores. The factory side-feed rail needs a top-feed rail conversion first.

Fitment

  • Toyota Supra Turbo (2JZ-GTE) 1993-1998, top-feed rail with 14mm bores
  • Nissan 300ZX Twin Turbo (VG30DETT) 1990-1996, top-feed conversion required
  • Porsche 911 / 993 (non-turbo) and 996 / 997.1
  • Buick Grand National and Turbo Regal; Pontiac Turbo Trans Am (1989 Anniversary)
  • BMW E36 M3 1996-1999, 328i 1996-1998, Z3 M Coupe / M Roadster

Specifications

  • Nominal flow: 2600 cc/min at 3.0 bar (43.5 psi)
  • Maximum differential fuel pressure: 9.0 bar (130.5 psi), with a minimum of 11 V at the injector
  • Flow data published by Injector Dynamics from 8 V to 18 V for accurate dead-time tuning
  • Electrical connector: USCAR
  • Fuel compatibility: gasoline, ethanol (E85 and flex fuel), methanol and all common hydrocarbon fuels. Not compatible with ethers (MTBE, ETBE, TAME) or nitromethane
  • Developed by Injector Dynamics in partnership with Bosch Motorsport

Running the factory harness? Add the Injector Dynamics 91.3 USCAR to Denso plug-and-play adapters.

Frequently Asked Questions

Will these plug into the factory MK4 Supra injector harness?
No. The ID2600-XDS uses a USCAR connector and the factory 2JZ-GTE harness uses Denso-style plugs. Add the Injector Dynamics 91.3 USCAR to Denso plug-and-play adapters, or repin the harness to USCAR.

What is the difference between this set and the 34mm ID2600-XDS 2JZ set?
This is the 60mm injector with a 14mm purple adaptor top, for top-feed rails built around full-length injectors. The 34mm set is the short injector made for the Radium Engineering 2JZ-GTE fuel rail and needs no adaptors.

Do I need a tune after installing ID2600-XDS injectors?
Yes. Injector size, dead times and short-pulse data must be entered in your ECU. Injector Dynamics publishes characterization data for most standalone and reflash platforms.

Are these injectors E85 and methanol compatible?
Yes. Injector Dynamics rates the ID2600-XDS for gasoline, ethanol and methanol. They are not rated for ethers or nitromethane.

You may also like