Guaranteed Fitment
Always the correct part
In-House Experts
We know our products
Added Value
Fast Support and Installation Help
Shipping
Wordwide Delivery
The GEN 2 FT Injector 820 lb/h is a 1.5 ohm low impedance injector flowing 5,880 cc/min at 43.5 psi. It works with any ECU through a peak and hold driver and is rated for every common fuel up to nitromethane. GEN 2 brings a new coil, needle and spray pattern and drops the internal screen for shorter dead time and better idle and low-RPM control.
| Flow | 820 lb/h (5,880 cc/min @ 43.5 psi) |
| Impedance | 1.5 ohms (low) |
| Voltage limit | Up to 24 V |
| Injector dimensions | 86 x 32 mm |
| Weight | 160 g |
| Connector | EV1 |
| Warranty | 90 days |
One FT Injector and one manual per injector.
Each low impedance FT Injector takes one upper and two lower O-rings; replacements are sold as the FT Injector O-Ring Replacement.
All standard non custom made to order items are eligible for return within 30 days of purchase. To request a return purchaser must email us or call to request Instructions on how to proceed with returning an item. Upon receipt of your return you will be issued a return within 3-5 business days. Any custom order items will only have 7 days from the date of purchase/payment to request a cancellation/refund. Beyond that time frame you will be issued a refund up to 30 days from purchase minus a 20% restocking/cancellation fee. All refunds will be issued in the same form as your payment was made/ If you purchase via PayPal your refund will be via PayPal etc. Buyer is responsible for all costs associated with the return of an item as far as shipping/freights go. All items must be return in NEW unused condition. Any damage to the item with be due a 20% minimum restocking fee. Exchanges for product defect or warranty will not incur any restocking charges and shipping charges will be credited as well.
