FuelTech FT Injector 125 lb/h GEN 3
The FT Injector 125 lb/h GEN 3 is a high impedance injector with an EV1 connector...
Guaranteed Fitment
Always the correct part
In-House Experts
We know our products
Added Value
Fast Support and Installation Help
Shipping
Wordwide Delivery
The FT Injector 125 lb/h GEN 3 is a high impedance injector with an EV1 connector that runs directly from any ECU, with no peak and hold driver. The third generation adds a new internal coil, needle geometry and spray pattern and drops the internal screen, giving shorter dead time and finer control at idle and low RPM.
- 125 lb/h flow rating
- High impedance, coil resistance 5.7-6.3 ohms - no peak and hold driver
- EV1 connector with silver plated terminals
- IP67 / NEMA6 ingress protection
- GEN 3: optimized coil, new needle geometry, next-generation spray pattern, no internal filter/screen
- Shorter dead time, better idle precision and stability across the operating range
- Each injector flow tested and calibrated for cylinder-to-cylinder accuracy
- Compatible with gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE
Specifications
| Overall height | 72.5 mm (2.85 in) |
| Overall width | 18 mm (0.71 in) |
| O-ring diameter | 14.6 mm (0.57 in) |
| Tip | 4.1 mm (0.16 in) |
| Overall diameter | 5.9 mm (0.23 in) |
| Coil resistance | 5.7-6.3 ohms |
| Ingress protection | IP67 / NEMA6 |
| Warranty | 90 days |
What's included
One FT Injector and one manual.
Read More
All standard non custom made to order items are eligible for return within 30 days of purchase. To request a return purchaser must email us or call to request Instructions on how to proceed with returning an item. Upon receipt of your return you will be issued a return within 3-5 business days. Any custom order items will only have 7 days from the date of purchase/payment to request a cancellation/refund. Beyond that time frame you will be issued a refund up to 30 days from purchase minus a 20% restocking/cancellation fee. All refunds will be issued in the same form as your payment was made/ If you purchase via PayPal your refund will be via PayPal etc. Buyer is responsible for all costs associated with the return of an item as far as shipping/freights go. All items must be return in NEW unused condition. Any damage to the item with be due a 20% minimum restocking fee. Exchanges for product defect or warranty will not incur any restocking charges and shipping charges will be credited as well.