Pressure sensor 35bar / 500PSI 0-5V (sealed gauge)
$129.02
MAXX-2258
MaxxECU
Sensors
Sealed gauge pressure sensor, 0-35bar / 500PSI range, 0-5V output, +5V supply from the ECU. NPT 1/8 thread.Manufacturer Product ID: 2258.Source: manufacturer specifications, MaxxECU...
Pressure sensor 700kPa 1/8 NPT 27 (MAP-sensor)
$184.31
MAXX-1824
MaxxECU
Sensors
MAP sensor, 1/8 NPT 27 thread, 700kPa rating. Air only — measures 0-689kPa (0-6bar of boost).Manufacturer Product ID: 1824.Source: manufacturer specifications, MaxxECU (Maxxtuning AB,...
Round Magnet Neodymium
$5.76
MAXX-1293
MaxxECU
Sensors
Small, strong round neodymium magnet for use with MaxxECU's flat cam position sensors. Diameter: 5mm, height: 2mm.Manufacturer Product ID: 1293.Source: manufacturer specifications, MaxxECU (Maxxtuning...
Stainless EGT weld nipple
$11.40
MAXX-898
MaxxECU
Sensors
Stainless steel weld nipple with female 1/8" NPT 27 thread. Welded into the collector, or one per exhaust port, for exhaust gas temperature measurement.Manufacturer...
Stainless O2 sensor welding nipple
$7.72
MAXX-996
MaxxECU
Sensors
Stainless steel O2 sensor welding nipple, M18x1.5mm.Manufacturer Product ID: 996.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).
Temperature sensor 1/8 NPT CLT (water / oil)
$48.39
MAXX-1280
MaxxECU
Sensors
Coolant/oil temperature (CLT) sensor, 1/8 NPT thread. Calibration: -20°C = 15.462 ohm, 130°C = 89 ohm.Manufacturer Product ID: 1280.Source: manufacturer specifications, MaxxECU (Maxxtuning AB,...
Temperature sensor HV 1/8 NPT CLT (water / oil)
$74.87
MAXX-2175
MaxxECU
Sensors
High-voltage coolant/oil temperature (CLT) sensor, 1/8 NPT thread. Uses a high-temperature, fast-responding NTC thermistor coated with blue insulating lacquer.Manufacturer Product ID: 2175.Source: manufacturer specifications,...
Temperature sensors M12 CLT (water / oil)
$32.83
MAXX-95
MaxxECU
Sensors
Genuine Bosch coolant/oil temperature (CLT) sensor, M12x1.5 thread. Resistant to water and oil, rated up to 140°C. Delivered without connector.Manufacturer Product ID: 95.Source: manufacturer...
Triggerwheel 60-2 127mm diam
$66.81
MAXX-1643
MaxxECU
Sensors
60-2 triggerwheel, 127mm outside diameter, 71mm centre hole.Manufacturer Product ID: 1643.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).
Triggerwheel EVO 4-9 18 teeth
$69.12
MAXX-1517
MaxxECU
Mitsubishi
Sensors
Replacement triggerwheel for Mitsubishi EVO 4-9, 18 teeth, 120mm diameter. One or two teeth need to be removed to create a missing-tooth pattern.Manufacturer Product...
USB chip (FT230XS-R)
$20.23
MAXX-2496
MaxxECU
Replacement USB chip for MaxxECU GEN1 units.Manufacturer Product ID: 2496.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).
VR to hall sensor converter (VR2DIN) board 2-channel DIY
$39.16
MAXX-2271
MaxxECU
Simple dual-channel VR (variable reluctance) to hall sensor converter board, for DIY installation.Manufacturer Product ID: 2271.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).
Weld nut 1/8 npt (aluminium)
$7.95
MAXX-2137
MaxxECU
Sensors
Aluminum weld nut, 1/8 NPT thread, for EGT sensor installation.Manufacturer Product ID: 2137.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).
Weld nut aluminium M10x1.0
$6.91
MAXX-2166
MaxxECU
Sensors
17mm long aluminum weld nut, M10x1.0 thread.Manufacturer Product ID: 2166.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).
Weld nut in aluminum M12x1.5mm
$6.91
MAXX-1242
MaxxECU
Sensors
Aluminum weld nut, M12x1.5mm thread, 16mm diameter. Intended for use with an intake requiring an intake temperature sensor.Manufacturer Product ID: 1242.Source: manufacturer specifications, MaxxECU...
Welding flange Bosch IAT with 12mm holes
$17.85
MAXX-1267
MaxxECU
Sensors
Aluminum welding flange for Bosch IAT sensors, with 12mm holes.Manufacturer Product ID: 1267.Source: manufacturer specifications, MaxxECU (Maxxtuning AB, Sweden).