{"product_id":"injector-dynamics-id2600-xds-2jz-gte-60mm-14mm-purple-top-set-of-6","title":"Injector Dynamics ID2600-XDS Injectors - 2JZ-GTE Supra 60mm, 14mm Purple Top (Set of 6)","description":"\u003cp\u003e\u003cstrong\u003eInjector Dynamics ID2600-XDS, 60mm length, 14mm (purple) adaptor top, 14mm lower O-ring. Set of six.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne of the highest-flow injectors Injector Dynamics makes, sized for big single-turbo 2JZ builds on E85 or methanol where an ID1700 runs out of duty cycle. This configuration is for 1993-1998 Supra Turbo (2JZ-GTE) engines already running a top-feed fuel rail with 14mm injector bores. The factory side-feed rail needs a top-feed rail conversion first.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToyota Supra Turbo (2JZ-GTE) 1993-1998, top-feed rail with 14mm bores\u003c\/li\u003e\n\u003cli\u003eNissan 300ZX Twin Turbo (VG30DETT) 1990-1996, top-feed conversion required\u003c\/li\u003e\n\u003cli\u003ePorsche 911 \/ 993 (non-turbo) and 996 \/ 997.1\u003c\/li\u003e\n\u003cli\u003eBuick Grand National and Turbo Regal; Pontiac Turbo Trans Am (1989 Anniversary)\u003c\/li\u003e\n\u003cli\u003eBMW E36 M3 1996-1999, 328i 1996-1998, Z3 M Coupe \/ M Roadster\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNominal flow: 2600 cc\/min at 3.0 bar (43.5 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum differential fuel pressure: 9.0 bar (130.5 psi), with a minimum of 11 V at the injector\u003c\/li\u003e\n\u003cli\u003eFlow data published by Injector Dynamics from 8 V to 18 V for accurate dead-time tuning\u003c\/li\u003e\n\u003cli\u003eElectrical connector: USCAR\u003c\/li\u003e\n\u003cli\u003eFuel compatibility: gasoline, ethanol (E85 and flex fuel), methanol and all common hydrocarbon fuels. Not compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/li\u003e\n\u003cli\u003eDeveloped by Injector Dynamics in partnership with Bosch Motorsport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning the factory harness? Add the \u003ca href=\"\/products\/injector-dynamics-uscar-to-denso-pnp-adapter-id91-3same-as-id90-4-and-dwconn-us-sum\"\u003eInjector Dynamics 91.3 USCAR to Denso plug-and-play adapters\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill these plug into the factory MK4 Supra injector harness?\u003c\/strong\u003e\u003cbr\u003eNo. The ID2600-XDS uses a USCAR connector and the factory 2JZ-GTE harness uses Denso-style plugs. Add the Injector Dynamics 91.3 USCAR to Denso plug-and-play adapters, or repin the harness to USCAR.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this set and the 34mm ID2600-XDS 2JZ set?\u003c\/strong\u003e\u003cbr\u003eThis is the 60mm injector with a 14mm purple adaptor top, for top-feed rails built around full-length injectors. The 34mm set is the short injector made for the Radium Engineering 2JZ-GTE fuel rail and needs no adaptors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a tune after installing ID2600-XDS injectors?\u003c\/strong\u003e\u003cbr\u003eYes. Injector size, dead times and short-pulse data must be entered in your ECU. Injector Dynamics publishes characterization data for most standalone and reflash platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these injectors E85 and methanol compatible?\u003c\/strong\u003e\u003cbr\u003eYes. Injector Dynamics rates the ID2600-XDS for gasoline, ethanol and methanol. They are not rated for ethers or nitromethane.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will these plug into the factory MK4 Supra injector harness?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The ID2600-XDS uses a USCAR connector and the factory 2JZ-GTE harness uses Denso-style plugs. Add the Injector Dynamics 91.3 USCAR to Denso plug-and-play adapters, or repin the harness to USCAR.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between this set and the 34mm ID2600-XDS 2JZ set?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the 60mm injector with a 14mm purple adaptor top, for top-feed rails built around full-length injectors. The 34mm set is the short injector made for the Radium Engineering 2JZ-GTE fuel rail and needs no adaptors.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need a tune after installing ID2600-XDS injectors?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Injector size, dead times and short-pulse data must be entered in your ECU. Injector Dynamics publishes characterization data for most standalone and reflash platforms.\"}}, {\"@type\": \"Question\", \"name\": \"Are these injectors E85 and methanol compatible?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Injector Dynamics rates the ID2600-XDS for gasoline, ethanol and methanol. They are not rated for ethers or nitromethane.\"}}]}\u003c\/script\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":51695171469529,"sku":"2600.60.14.14.6","price":2390.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0692\/2734\/8185\/files\/ID-2600XDS-Injectors-950pixels.jpg?v=1795151785","url":"https:\/\/www.autosportsengineering.com\/products\/injector-dynamics-id2600-xds-2jz-gte-60mm-14mm-purple-top-set-of-6","provider":"Autosports engineering","version":"1.0","type":"link"}